Different types of concrete handsaws can be used to complete your concrete cutting jobs. The right type must be used to complete your job to the highest standard so that you are not dissatisfied with the finished result.
At Cutting In, we are expert concrete cutters in Sydney and can help you with all your concrete cutting jobs.
Types of concrete handsaws
There are two different types of concrete handsaws that can be used for different jobs. When completing your job, you need to know which handsaw to use to get the desired result.
The two types are ripsaws and crosscut saws.
What is the difference between these handsaws?
A rip saw is designed to cut through some of the toughest surfaces like granite and concrete. The rip saws teeth alternate from right to left, gradually knocking out the concrete. You must use force to push the rip saw into the concrete for it to be cut and, when done properly and with skill, it can leave you with a clean cut.
A crosscut saw’s teeth smaller than a rip saw and are angled backwards and bevelled. They can be used when you need to make a smaller or a more precise cut into concrete than you could get with a rip saw. Unlike a rip saw, you do not have to just put force into the concrete, but you can use more of a push and pull method, which can make the job easier.
It is essential to understand the different types of handsaws before embarking upon your job so that you choose the right one.
Before you begin
Once you know which type of handsaw to use, you need to complete safety checks to ensure the saw is safe to use and will work well.
• Check the teeth on your handsaw are straight. Make sure there are no bent teeth and that the blade itself is straight.
• Check the teeth are not blunt. You need the teeth to be sharp to complete your job well. Touch the blades gently to see that they are sharp but use caution to ensure that you do not cut yourself.
• Check over the rest of the handsaw, including the crown and tension.
When cutting
Make sure you have control over the handsaw; first, draw a line and then carefully hold the concrete as a guide and make some small notches, so you know where to cut.
Also, check the angle of the saw is always at 45° and keep your elbows in while cutting.
Use experts where necessary
Using a handsaw takes a lot of skill. Cutting In can complete your concrete hand sawing in Sydney for you using our skill and expertise. Call us today.
At Cutting In, we are expert concrete cutters in Sydney and can help you with all your concrete cutting jobs.
Types of concrete handsaws
There are two different types of concrete handsaws that can be used for different jobs. When completing your job, you need to know which handsaw to use to get the desired result.
The two types are ripsaws and crosscut saws.
What is the difference between these handsaws?
A rip saw is designed to cut through some of the toughest surfaces like granite and concrete. The rip saws teeth alternate from right to left, gradually knocking out the concrete. You must use force to push the rip saw into the concrete for it to be cut and, when done properly and with skill, it can leave you with a clean cut.
A crosscut saw’s teeth smaller than a rip saw and are angled backwards and bevelled. They can be used when you need to make a smaller or a more precise cut into concrete than you could get with a rip saw. Unlike a rip saw, you do not have to just put force into the concrete, but you can use more of a push and pull method, which can make the job easier.
It is essential to understand the different types of handsaws before embarking upon your job so that you choose the right one.
Before you begin
Once you know which type of handsaw to use, you need to complete safety checks to ensure the saw is safe to use and will work well.
• Check the teeth on your handsaw are straight. Make sure there are no bent teeth and that the blade itself is straight.
• Check the teeth are not blunt. You need the teeth to be sharp to complete your job well. Touch the blades gently to see that they are sharp but use caution to ensure that you do not cut yourself.
• Check over the rest of the handsaw, including the crown and tension.
When cutting
Make sure you have control over the handsaw; first, draw a line and then carefully hold the concrete as a guide and make some small notches, so you know where to cut.
Also, check the angle of the saw is always at 45° and keep your elbows in while cutting.
Use experts where necessary
Using a handsaw takes a lot of skill. Cutting In can complete your concrete hand sawing in Sydney for you using our skill and expertise. Call us today.
No comments:
Post a Comment